Concrete Cutting Sydney Equipment – Choice and Use
The most effective equipment for concrete cutting Sydney and drilling (with which it is possible to process concrete structures) is diamond cutting and drilling saws.
Equipment for diamond drilling or concrete saw allows making holes of different diameters in solid concrete (25-1200 mm). If you should make a hole with a range of 20-502 mm, the depth can reach several meters. These tools for cutting concrete can be used in the “dry” process and by using water. The second method is used in cases where it is required to reduce the amount of dust that appears. Therefore, wet drilling technology is also applied during the restoration of the exploited premises.
If the wall is very deep, a cable cutting of concrete is used. The design of such a tool consists of three mechanisms: power plant; rope on which diamonds are applied; and the pillow, which drives the rope under the control of the power plant. The design also emphasizes racing rollers that achieve the required form of cutting. The manual allows the mechanism to operate on small diameters of the diameter. The device of such a mechanism can be both hydraulic and electric. This equipment is used for: cutting beams and poles; expansion of the door or window opening; arranging openings for communication systems; disassembly of various designs. Cutting reinforced concrete cables can also be used during wet cutting or in conditions where it is necessary to reduce noise to a minimum value.
For cutting horizontal surfaces to a depth of 320 mm, joint cutters are the most effective. These tools create technological or temperature joints in concrete structures. Using this equipment, you can reduce the probability of cracking because it does not create severe pressure on the coating. The base of this tool is the frame on which the engine of different types is installed: petrol, diesel or electric unit.
There are also self-winding and handheld edging tools. The self-winding tools are more complex in design and quite large, which excludes the possibility of their use in a small space. The electric tools are less dimensional and noisy, but during their work, there are several contraindications. For example, it is not allowed to use an electric chassis in a room where the humidity is high. Diesel units have intentions for long-lasting jobs. Therefore, they are usually made in the form of self-propelled machines, so their price is quite high.
If during the reconstruction of the room you are facing a problem – to destroy redundant surface without damaging the reinforcement, in this case, use concrete cutting Sydney.